veritas storage foundation for windows 5 1 sp2 download
Fast & Simple Way to Download Free Software
solidworks 2013 windows 7 64 bit free downloadso fresh spring 2012 download freetenorshare android data recovery free downloadwindow washer for windows 7 64 bit free download
The documents titled Supported Hardware List and Recommended Software Levels provide you with the operating systems, Host adapters, SAN fabric elements, RAID controllers and selected other hardware which were tested or qualified by IBM. This page combines the previously separate Software and Hardware support matrices.
For os, we show the most up-to-date tested release levels and service packs. Only the listed systems are supported. For host adapters, SAN fabric elements and RAID controllers, we list our currently recommended firmware and/or BIOS levels and formally support just the hardware listed.
While these levels usually are not mandatory levels to get a customer to become supported by IBM, these are recommended levels. There could possibly be known operational difficulty with older firmware and BIOS levels and, in such cases, a person working with the IBM Support center could be directed to upgrade a factor to a recommended level.
SVC will support all OS applications at any level that run to your standard block level OS interface. This includes such applications as Oracle, HP Virtual Connect, etc.
The levels shown in italic text indicate previously recommended levels.
The level shown in bold text indicates the modern recommended level.
Where interoperability items have gone end of life beyond support and so are no longer backed up by the vendor either generally or by extended service contact IBM continues to support the earth on a best are capable of doing basis. Where issues occur which can be deemed by IBM support to get directly related to things that are not generally sustained by the vendor IBM may direct customers to upgrade a factor to a recommended level.
IMPORTANT NOTICE: IBM Storwize V7000 V6.4.x is will no longer supported. Refer towards the SAN Volume Controller Related Software Support Statement for more information.
V 6.3 Supported Hardware List, Device Driver, Firmware and Recommended Software Levels for IBM Storwize V7000
IBM Storwize V7000 V6.2 Supported Hardware List, Device Driver, Firmware and Recommended Software Levels
IBM Storwize V7000 Supported Hardware List, Device Driver, Firmware and Recommended Software Levels V6.1
Easy Tier will not be supported in different configuration where SSDs are certainly not exclusively used as the Tier 0 storage.
The following Fibre Channel attached host types are supported for non-disruptively moving a volume between I/O groups control enclosures.
Non Disruptive Volume Move may leave the identical Volume mapped to hosts in precisely the same host cluster using different SCSI IDs. If the host cluster cannot tolerate this configuration then non disruptive move is not used.
For Host Clusters which cannot tolerate this issue users should quiesce their hosts, perform the NVDM steps to maneuver the volumes completely to another IO group, reassign the SCSI IDs manually, then reconfigure and restart the hosts.
In SDDPCM 2.6.4.0, a brand new command changeprefcntl is brought to solve the host limitation - Preferred paths will not be detected after moving a volume into a new I/O group. in SDDPCM 2.6.3.2
iSCSI hosts are certainly not supported.
NPIV just isn't supported on this configuration.
SAN Boot Supported, boot path ought to be updated after NDVM
In NPIV configuration when RAW I/O is running over a disk, some enabled paths of the disk gets failed/invalid during NDVM. The failed/invalid paths will likely be recovered automatically by AIX path health check hence application I/O will never be impacted. Disks utilised by filesystem will not have such issue.
Hewlett Packard B.11.31.1303
For other host types, I/O must be quiesced when moving a volume.
EOL: extended service contract only.
For specific serverHBA combinations please refer to your IBM Power Systems Information Centre.
Veritas DMP Version 5.1 SP1
Minimum supported code levels: AIX 7.1 TL1, 6.1 TL7, VIOS 2.2.1
Supported with Cisco Nexus and Brocade 8000/VDX6730 FCoE switches. Please understand the switch tables for more information
AIX 5.3 TL12 all versions of V6.1 7.1 supported via single path only.
NPIV is supported with FC 5273, FC 5735 and FC 5708 HBAs
IBM i 7.1 Technology Refresh PTF Group Level 6, in conjunction with permanently applied PTFs MF56600, MF56753, and MF56854 or Resave level RS-710-H
IBM i isn't supported with IBM Power 6 Servers.
Please see this link for even more product support.
Please check out the V6.4 Software Restrictions document for info on Windows SAN Boot Clusters
SAN Boot just isn't supported with Qlogic Driver 9.1.8.25
Qlogic Fibre Channel cards will not be supported linked to Cisco or Brocade FCF switches.
Veritas Storage Foundations Settings.
The default setting of VERITAS Storage Foundation 5.1 is SCSI-2. However in Configurations with SVC or V7000 IBM recommends the usage of SCSI-3 for native solution, VCS VERITAS Storage Foundation 5.1 VSFW 5.1 HA DMPDSM or when utilizing VERITAS Storage Foundation 5.1 with SDDDSM.
The default setting of VERITAS Storage Foundation 5.1 is SCSI-2. However in Configurations with SVC or V7000 IBM recommends the using SCSI-3 for native solution VCS VERITAS Storage Foundation 5.1 VSFW 5.1 HA DMPDSM or whenever using VERITAS Storage Foundation 5.1 with SDDDSM
Emulex iSCSI Storport Miniport Driver Version 2.102.348.0
SCVMM is supported on Storwize V7000 6.4.1.5 and better
BIOS 5.10a2 Firmware 2.01a4
BIOS 5.12a12 Firmware 2.01a11
Linux 2.6 Device Driver Issues with Levels Qlogic 8.01.07 or Higher and Emulex 8.16.34 or Higher
Fabric maintenance and CCL restrictions apply, check out Software Restrictions for more details.
Volume expansion contraction just isn't supported.
Ficon Express 4, 10km LX: 3321
Ficon Express 4, 4km LX: 3324
Requires the absolute minimum RHEL 4 kernel volume of zLinux RHEL4U8,
Restrictions apply, please look at the Software restrictions document
Supported with Cisco Nexus and Brocade 8000 /VDX6730 FCoE switches. Please start to see the switch tables additional information
0102-NX-X, iSCSI SAN Boot supported in Network Boot Configurations. 10102-I Oce10102-N-X with iSCSI personality enabled, are hardware iSCSI
V6.3 Kernel 6.s390x
Minimum Supported Storwize V7000 version 6.4.1
Ficon Express 4, 10km LX:3321
Veritas Cluster Server 5.1
HP-UX 11i v2 B.11.23 for PA RISC and Itanium Fibre Channel
BUNDLE11iB.11.23.0409.3 HWEnable11iB.11.23.0706.064
FEATURE11iB.11.23.0706.063
Set PV Physical Volume timeout to 60 seconds whenever using PV Links. This is in order to avoid I/O timeouts during fabric maintenance and IBM Storwize V7000 CCLs Concurrent code loads
B.11.23.0409.3 Required Patch Bundle for HP-UX 11i v2 B.11.23,
B.11.23.0803.070a Feature Enablement Patches for HP-UX 11i v2,
B.11.23.0712.070 Hardware Enablement Patches for HP-UX 11i v2,
B.11.23.10.05 HPUX 11.23 Support Tools Bundle,
B.11.23.0806.072 Applications Patches for HP-UX 11i v2,
B.11.23.0806.072 Base Quality Pack Bundle for HP-UX 11i v2,
B.11.23.0712 HP-UX Mission Critical Operating Environment Component
HP-UX 11i v3 B.11.31 for PA RISC and Itanium Fibre Channel
FibreChannel-00 B.11.31.0803
FibreChannel-00 B.11.31.0809
FibreChannel-00 B.11.31.0812
FibreChannel-00 B.11.31.0903
HWEnable11iB.11.31.0803.318a
FEATURE11iB.11.31.0803.318b
FibreChannel-00 B11.31.1003
FibreChannel-01 B.11.31.1103
FibreChannel-01 B.11.31.1403
FibreChannel-02 B.11.31.1103
Supplied with SAN package consisting of the drivers Select StorageTek SAN 4.4.x here.
An issue may be identified with certain Solaris versions that could cause I/O failures throughout a failover scenario.
Driver installed with OS: Driver Name: qlc Driver Version: 20100301-3.00
SPARC SunOS 5.10 Generic142909-17
Minimum SVC Version 6.4.1.5
An issue is identified with certain Solaris versions which could cause I/O failures throughout a failover scenario. The effected Versions are S11.1SRU20 and then.
IDR1352.1 for Solaris 11.1.21.4.1
IBM has seen a challenge with path recovery after having a node may be removed from the IBM Storwize V7000 cluster on an extended period. If this dilemma is encountered manual rescan of paths is necessary
Please apply all maintenance recommended by server vendor.
Please apply all recommended VMware maintenance.
Supported guest environments must align with VMware support statements.
Clustered Windows guest environments are not supported.
Please start to see the following Flash whenever using VAAI with Storwize V7000 version 6.4
Customers who will be running ESXi 5.5 U2 or ESXi 6.0 or are intending to upgrade to levels should review this Flash
Storwize V7000 Version 6.3.0.1 supports multi session VMware iSCSI. Earlier 6.x Versions support single session only
Storwize V7000 version 6.4.1.5 above
Fixed Round Robin Multipathing are supported.
When mapping vdisks to hosts, only LUNs from the range 0 to 254 might be used
Minimum supported IBM Storwize V7000 level 6.2.0.3.
Please refer on the following documentation regarding requirements when upgrading in order to six.2.0.3 from earlier versions of IBM Storwize V7000.
When mapping vdisks to hosts, only LUNs inside range 0 to 254 may be used.
IBM Storwize V7000 Volume Expansion and contraction isn't supported.
z/VM 5.4.0 and later on supports Emulated Device EDEVICE attachment for all those EDEVICE use including paging, spooling, minidisks, and system IPL.
z/VM 5.4.0 and then also supports guest attachment via dedicated FCP subchannels.
See Linux for System z and z/VSE info for support details regarding guest attachment via dedicated FCP subchannels.
Apple Mac OS X Server 10.5.5
Apple Mac OS X Server 10.6.x 32bit
IBM Storwize V7000 supports Server Blades that meet all of these criteria;
1. The Server blade contains Qlogic and Emulex generic chip sets running the IBM or equivalent supported Drivers;
2. These generic chip sets and drivers are present from the IBM Storwize V7000 support matrix for HBAs employed in non Blade servers;
3. The Server blade is running an OS that is certainly present within the IBM Storwize V7000 support matrix;
4. Either a Fibre Channel move through module is used inside the Blade server chassis in order to connect the Blades in an external FC network; or
The Fibre Channel switch module used within the Blade server chassis is equivalent from the sense it runs a similar microcode on precisely the same switch hardware base to your discrete Fibre Channel switch that is certainly already listed inside the IBM Storwize V7000 support matrix.
The IBM HS20 is End of Service.
Follow this link for installing device drivers.
Red Hat EL Advanced Server 4.0
Steeleye Lifekeeper 6.3.0
GFS Li 6.1 is supported with local boot.
Red Hat EL Advanced Server 5.0 through U9
We recommend utilizing the 2.6.5-7.308-smp kernel.
2.6.5-7.193 and a pair of.6.5-7.257 kernels usually are not supported
Problem: SLES 11Server x8664 doesnt boot after OS installation on SAN disk. Problem appears when Adaptec Raid controller BIOS local disk and Emulex HBA BIOS are active.
Solution: Host boots from SAN disk when local disk controller BIOS is disabled.
The IBM HS21 is currently End of Service.
With SAN Boot on 44X1940, 00Y3270, 44X1945 46M6065 Only
With 90Y3566 90Y3550 the BNT 10 Port 10Gb Ethernet Switch Module PN 46C7191 and QLogic Virtual Fabric Extension Module PN 46M6172 are important components.
PN 90Y3550 has to be upgraded with PN 49Y4265 Advanced Upgrade. pNIC mode only if used with the IBM Brocade Converged 10GbE Switch Module P/N 69Y1909 pNIC or vNIC1 mode when utilized on the IBM BNT 10 Port 10Gb Ethernet Switch Module P/N 46C7191
VERITAS Storage Foundation High Availability v5.1
Red Hat Enterprise Linux 5.0 through 5.9
Redhat enterprise Linux 5.8
Redhat enterprise Linux 5.9
Redhat enterprise Linux 6.3
Redhat enterprise Linux 6.4
HBA NodeTimeOut on HP branded Emulex adapters with Windows OS really should be set to a few seconds.
Please refer on the Configuration Guide which details the recommended customer configurable settings that must be applied for every storage controller type.
Round Robin: IO is distributed over multiple ports about the controller.
Mdisk Group Balanced: IO is distributed to one target port for the controller for every mdisk. The assignment of ports to mdisks is chosen to spread every one of the mdisks inside of a mdisk group across the many active target ports as evenly as you can.
Single port active: All IO is sent to your single port within the controller for those mdisks.
Controller Balanced: IO is shipped to one target port within the controller for every mdisk. The assignment of ports to mdisks is chosen to spread all of the mdisks accross the many active target ports as evenly as you possibly can.
Minimum Storwize V7000 firmware level 6.4.1.5 required
IBM FlashSystems 710, 810, 720 820 are certainly not currently supported with 16Gbps SANs.
If you're using 1.1.0.3 firmware please upgrade to your later version.
Concurrent download of ESM code with I/O just isn't supported.
Do not reboot both controllers simultaneously.
Storwize V7000 Supports SAS and SATA Drive configurations.
Single Controller configuration isn't supported.
RAID-5 Array size have to be 41 or larger.
RAID-6 Array size need to be 411 or larger.
Ensure Host type is placed to IBM TS SAN VCE.
DS3400 maximum LUNs per partition happens to be 32, limiting the quantity of LUNs from just one DS3400 with a single Storwize V7000 cluster to 32
Please talk about DS3950 documentation intended for ESM Download.
Please refer the DS4000 website for specific configuration guidelines, cabling requirements restrictions when attaching EXP810 to DS4300 DS4500
DS4000 copy services FlashCopy, VolumeCopy, MetroMirror could be used with Storwize V7000
DS4000 range maximum LUNs per partition happens to be 256, limiting the amount of LUNs from just one DS4000 to some single Storwize V7000 cluster to 256.
If you've got code, you MUST contact DS4000 support ahead of upgrading in your DS4000 firmware. The release is will no longer supported.
Concurrent download of ESM firmware with I/O is supported with controller firmware 06.23.05.00 or later.
DS4000 copy services FlashCopy, VolumeCopy, MetroMirror is usually used with Storwize V7000.
Please reference DS5000 documentation regarding ESM Download.
Please refer the DS5000 website for the most recent recommended DS5000 client software, RDAC levels, specific configuration guidelines, cabling requirements restrictions when attaching EXP5000 and EXP810
DS5000 copy services FlashCopy, VolumeCopy, MetroMirror may be used with Storwize V7000.
DS5000 range maximum LUNs per partition is 256, limiting how many LUNs from one DS5000 into a Storwize V7000 cluster to 256.
For further support, including interoperability details latest supported code levels, go to DS6800 support pages
DS6000 copy services FlashCopy, MetroMirror might be used with Storwize V7000.
For further support, including interoperability details latest supported code levels,
DS8000 copy services FlashCopy, MetroMirror is usually used with Storwize V7000.
Do not try to create 512 LUNs with 10.0 fimware, the present maximum number of LUNS supported is 511
XIV Concurrent code upgrade is supported from XIV code levels 10.1.0a 10.1.0b to XIV code level 10.2.0a and above.
Please confer with your XIV TA ahead of performing any upgrades on XIV.
Concurrent Upgrade from 10.2.2 to 10.2.2a will not be supported
Your HP support representative will do hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to Storwize V7000
With IBM Storwize V7000 Version 6.4.0.3 or more
Your HP support representative will work hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to Storwize V7000
Ensure that you just wait until each Volume is formatted before you decide to present it to your IBM Storwize V7000.
Your HDS support representative will work hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to Storwize V7000
Ensure which you wait until each Volume is formatted before you decide to present it for the Storwize V7000.
HDS Advanced Function of Thin Provisioning is supported with SAN Volume Controller.
Please visit this Flash if you want to upgrade to Version 6.4.1.2
2015 veritas storage foundation for windows 5 1 sp2 download